FHPQ-10/20KV puncture type lightning protection pin insulator

Discover our factory-made FHPQ-10/20KV puncture type lightning protection pin insulator. Trust our expertise in delivering reliable and high-quality products.

Request a Quote
  • FHPQ-10/20KV puncture type lightning protection pin insulator
  • FHPQ-10/20KV puncture type lightning protection pin insulator
  • FHPQ-10/20KV puncture type lightning protection pin insulator

PRODUCTS DETAILS

This product is suitable for the insulation support of overhead lines, and has the function of preventing the overhead insulated wires from being broken by lightning strikes, the porcelain insulation being blown up, and reducing tripping due to lightning strikes. The principle is: when the lightning overvoltage exceeds a certain insulation blocking value, it will cause a flashover discharge between the arc rod and the steel foot of the lightning protection column, forming a short-circuit channel, and the subsequent power frequency arc will burn at the discharge gap. to protect the wires from being burned. This product also has puncture and live functions when applied to insulated wires. The installation and construction are very convenient and reliable. There is no need to peel off the insulating layer, so as to avoid water ingress and less corrosion of the wire core. At the same time, the labor intensity of the operator is greatly reduced. Since the pillar insulator and the anti-arc metal parts are combined into one (equipotential), they are not affected by the load side of the ring network power supply (deviation from the power supply side), making the circuit simple and beautiful, and greatly reducing the cost.参数With the popularization and application of insulated overhead distribution lines, if the necessary and effective lightning protection measures are not taken, the insulated lines will be broken due to lightning strikes caused by direct lightning strikes and induced lightning, and the insulators will burn out. Our company applies the lightning protection principle of external gap arc ignition to the pin insulator, and adopts the patented puncture type structure and the unique arc ignition device structure (which can be replaced and maintained separately), which is easy to install (no need to peel off the insulating layer), High performance (self-weight pressing contact), simple and beautiful (with silicone rubber insulation cover), not only has the function of pin insulator, but also has the function of lightning strike and disconnection, suitable for the installation of 10 ~ 20kv overhead insulation new lines or old lines The improvement has great promotion value.Installation instructions: This product is installed on the cross arm, and the nut can be tightened. It is equivalent to the traditional insulator installation method. The arc striker is facing the load side. At this time, the outer layer of the wire should be close to the bottom of the wire slot, and the piercing teeth should pierce the wire. The insulating layer is closely connected with the conductive layer inside the wire, an insulating shield is installed outside the wire clamp, and the insulating shield is fixed with a fixing buckle  

Hot Products

FZRN25-12D 12KV 630A Indoor high-voltage vacuum load switch and fuse combination electrical appliances

FZRN25-12D 12KV 630A Indoor high-voltage vacuum load switch and fuse combination electrical appliances

OXY 15-330KV  9-18.2mm   Pre-twisted single and double OPGW/ADSS fiber optic cable suspension clamps  Power fitting

OXY 15-330KV 9-18.2mm Pre-twisted single and double OPGW/ADSS fiber optic cable suspension clamps Power fitting

GCK 380V 660V 630A 3150A power distribution room low-voltage control system switch cabinet

GCK 380V 660V 630A 3150A power distribution room low-voltage control system switch cabinet

KW(JJC) series  1-20KV   0.75-400mm²  Insulated puncture type cable connector

KW(JJC) series 1-20KV 0.75-400mm² Insulated puncture type cable connector

TBP85-131 6/10KV three-phase combined overvoltage protector overcurrent and thermal shutdown lightning protection

TBP85-131 6/10KV three-phase combined overvoltage protector overcurrent and thermal shutdown lightning protection

ZR-YJV 0.6/1KV 1.5-400mm² 1-5 core  Low voltage flame retardant cross-linked copper core power cable

ZR-YJV 0.6/1KV 1.5-400mm² 1-5 core Low voltage flame retardant cross-linked copper core power cable

YDF  0.6/1KV  61-1605A  10-1000mm²  Waterproof flame retardant single-core multi-core prefabricated branch power cable

YDF 0.6/1KV 61-1605A 10-1000mm² Waterproof flame retardant single-core multi-core prefabricated branch power cable

SBT  12-20mm  Electric power fittings and equipment terminal clamp  Copper transformer wire clip

SBT 12-20mm Electric power fittings and equipment terminal clamp Copper transformer wire clip

JLSZV2-6/10W 6/10KV three-phase three-wire outdoor dry combination transformer high voltage metering box

JLSZV2-6/10W 6/10KV three-phase three-wire outdoor dry combination transformer high voltage metering box

HXGN 12KV 630A Box-type fixed ring network switchgear Electric control cabinet Switch control cabinet

HXGN 12KV 630A Box-type fixed ring network switchgear Electric control cabinet Switch control cabinet

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours