Electric meter box clamp is a kind of electric meter box clamp with small resistance, reliable connection and tightening force It is a kind of non-load-bearing power connection hardware, which is often used for the connection between the main line of plastic insulated copper and aluminum wires and the household branch of the electric meter. The product design inherits the characteristics of the hinged structure of the energy-saving wire clip, and adopts the vertical outlet method and self-locking function that does not affect the conductor. It is labor-intensive, does not damage the wire during installation and disassembly, can be reused many times, has the same life as the wire, and greatly improves work efficiency. It is an environmentally friendly and energy-saving product. The product is made of special aluminum alloy material, and is scientifically and reasonably designed and constructed, so that it can change with the external environment and load conditions during use, and the contact pressure of the clip on the wire is very small, so that the connection and connection meet the best requirements. At the same time, it can maintain a constant contact pressure between the wire and the clip for a long time, the constant and sufficient pressure and the maximum contact surface can maintain a very low contact resistance for a long time, and the overload capacity is strong, forming a stable pressure load on the wire. 1. The product design inherits the two characteristics of the hinged structure of the energy-saving wire clip and the fixed cover, which greatly strengthens its overall uniform and uniform stress function, reduces the influence of human factors during installation, and also makes the appearance rounder and more beautiful. beautiful. In addition, it adopts the vertical outlet method that does not affect the conductor and the unique science is the self-locking function of the male block and the C-type clip to form a self-locking whole. It is more in line with the needs of aerial work and is easy to install. 2. The excellent material and scientific and reasonable structure of the electric meter wire clip make it in the process of use, with the change of the external environment and load conditions, and the contact pressure of the wire clip to the wire changes very little, so that the connection and connection can meet the best requirements. . 3. The use of special silicon-magnesium-aluminum alloy has elasticity, which can ensure a constant contact pressure between the wire and the clip for a long time. The constant and sufficiently large contact pressure and the maximized contact surface can maintain a very low contact resistance for a long time, and the overload capacity is strong. , forming a stable pressure load on the wire. And coated with anti-corrosion, anti-oxidation, hydrophobic electric power compound grease with strong electrical conductivity, can make the wires of different materials have good contact, such as: aluminum-aluminum, copper-copper connection, copper-aluminum transition. (Conductor paste volatilization period of 15 years) so as to make the circuit contact performance good and reduce loss. 4. It is fastened by bolts. The bolts are imported stainless steel, which has strong anti-corrosion ability and quick installation supervision. All you need is a universal wrench. The price is also economical and reasonable, and the price-performance ratio is relatively high. 5. It has stable and good contact performance, maintenance-free, inspection-free, reduces maintenance costs, enhances reliability, and does not damage the wires during the disassembly of the installation box! Application range: Applicable voltage level: 300V/500V, 600V, 1000V Scope of application: The connection between the 300/500V, 600V/1000V main line (single plastic/double plastic copper stranded wire, aluminum stranded wire) in the urban network or rural network and the household electricity meter1. Strip the insulation layer of the wire, the length of the main wire is 32mm-38mm, and the length of the branch wire is 15mm-20mm; 2. Put the clamp into the main line; 3. Insert the branch wire into the corresponding wire clip wiring hole (large hole: 10mm², 16mm², 50mm², 70mm², small hole: 2.5mm², 4mm², 6mm², 25mm², 35mm²); 4. Insert the bolt, leveling washer, spring washer, and nut from the typing surface of the casing, and then tighten the nut until the clip cannot slide; 5. Install the insulating cover