This product is suitable for the intermediate connection or terminal connection of indoor and outdoor low-voltage insulated cables of 0.6/1KV and below The MJPB pre-insulated connectors is designed for service and lighting cables The MJPT(MJPTN) pre-insulated connectors are designed for LV-ABC systems with a neutral messenger.The MJPT is used on the neutral conductor 1. Fully enclosed connection state, preventing the intrusion of foreign matter and water 2. The conductive paste is coated inside the tube, which can effectively reduce the connection resistance and potential difference 3. It is suitable for copper or aluminum wires, between wires of different materials Can be connected to each other to filter 4. The cable after connection can withstand mechanical pulling 5. Aluminum tube material: aluminum ≥ 99.5% 6. The insulating sheath is made of high-strength aging-resistant engineering plastics, which are made by injection molding 7. The marking on the insulating sheath is clear, and the marking information includes the die specification, crimping sequence and times, conductor Cross- sectional area, stripping length 8. The cross-sectional area of the conductor can be identified by the color code of the elastomer rubber cap 9. The elastomer rubber cap and silicone grease ensure that the product has good waterproof performance 10. The insulation layer of the cable needs to be stripped before installation 11. The product Pass the underwater 6KV/1min insulation voltage test