YBD 6-10KV 30-2000KVA Outdoor prefabricated underground box type substation
YBD 6-10KV 30-2000KVA Outdoor prefabricated underground box type substation
YBD Outdoor Prefabricated Underground Box Type Substation, a factory-made product for 6-10KV 30-2000KVA. Get reliable, efficient power solutions from our factory.
YBD series landscape semi buried box type substation is a new landscape box type substation in recent years. The floor area of buried box type substation is only 30% of that of traditional box type substation, with low noise and electromagnetic radiation.. The main part or all of it is buried underground, occupying little or no land. The visual effect is very good, which effectively solves the tension of urban land, harmonizes with the surrounding environment, and is highly praised by the majority of users. Landscape buried transformer refers to that the complete set of devices of the box type substation are all installed in a fully sealed box, and the whole device is set below the ground level. It is the same as the box type substation on the ground and the internal equipment. The same production is that the 10KV input voltage is reduced to 400/220V distribution voltage through a transformer and then sent to the load point. It can be used in the ring network distribution system, and also can be used as a substation powered by the radial grid terminal. This fully buried type is also known as the underground substation. Its box has excellent anti-corrosion capacity, extrusion capacity and absolute sealing. Because of its unique structural advantages, landscape buried box type substation is widely used in small urban power distribution stations, street lamp power distribution, real estate development, major landscape projects, and the reconstruction and construction of mobile operation substations. They are highly integrated with the urban landscape and so on, which seems not to be recognized by people at ordinary times. The landscape type box transformer substation has the characteristics of flexible combination, convenient transportation, convenient installation, low operation and maintenance cost, small floor area, no pollution, etc. It is suitable for urban power grid reconstruction because it goes deep into the load center, reduces the power supply radius, and improves the terminal voltage quality. In some cold areas in the north, landscape buried box type transformer is very popular. The transformer is buried underground and can operate under constant temperature. The landscape box type substation adopts new high-quality materials and equipment. The overall service life of the substation is more than 20 years, which realizes maintenance free and maintenance free of the substation, effectively improves the reliability of the power supply system, and more effectively solves the urban land shortage and is an environment-friendly box type substation. The above ground part of the landscape box type substation is the switch equipment of advertising light box, which can be used as the carrier of public welfare and other activities.Product features: 1. The landscape-type buried box substation adopts a modular design as a whole, which not only occupies a small area, but also has a high waterproof function. 2. The low-voltage power distribution cabinet above the ground is mainly made of stainless steel, which can realize the adjustment of high and low voltage according to the user's electricity demand. 3. For the sake of beautiful appearance, a full-color LED display screen is used in the design process of the landscape light box. The display screen can display rich and varied color patterns and animation videos, and can also show some real-time dynamics in society for residents to understand. , to display the multimedia effect perfectly. 4. The intelligent landscape-type box-type transformer can not only meet the needs of residents to achieve high and low voltage equipment, but also realize the remote measurement function of voltage, current and other information by configuring DTU intelligent monitoring devices. 5. Compared with the traditional box substation, the landscape buried box substation also adopts a fully sealed design, which has high waterproof performance. 6. In order to ensure the normal operation of the transformer and reduce the impact of the environment, an automatic drainage and temperature detection system is installed in the buried transformer and placed in a fully sealed box. 7. The installation of the landscape-type buried box transformer is relatively simple. It is only necessary to place the transformer in the pre-set pit, then tamp the soil and install the box on the ground. Generally, it is not necessary to separately install the buried transformer. maintain. Product configuration: The landscape type transformer box includes buried transformers. The iron core of the buried transformer is mainly S11 series solid rolled iron core. Compared with the amorphous alloy iron core transformer of SH15, the loss of the transformer is lower, which has the characteristics of material saving and energy saving. Especially when the transformer is no-load, the loss and no-load current are lower. As the lighting system in the city is often in the no-load state, S11 series of three-dimensional coil core transformers are more in line with the needs of urban lighting system construction. At the same time, the buried transformers of this series also have good sealing and waterproof functions and insulation and anti-corrosion functions. The high-voltage part is mainly configured with SF6 switchgear, which is not only small in size, but also generally does not require maintenance, and has safe and reliable use performance. The configuration of the low-voltage part is mainly the setting of the low-voltage distribution cabinet. The energy-saving device is installed in the low-voltage distribution cabinet, and the street lamp remote monitoring system and power supply metering system are installed on the side to achieve the telemetry function. At the same time, in order to achieve the beautiful appearance, the design of the outer light box is more flexible.Product Advantages： 1. The landscape-type buried substation can be called in many ways, such as semi-buried box-type substation, landscape-type box-type substation, pre-installed underground box-type substation, landscape-type buried substation, etc. This is a low-carbon, energy-saving, environmentally friendly, and green integrated power distribution equipment. Their application in many fields is more in line with our concept of building an "energy-saving society", and it is more energy-saving and environmentally friendly, beautifying the environment, and reliable operation. Many advantages. 2. The landscape buried box substation is a box substation product born for the needs of urban development. It is a complete set of power supply and distribution equipment that is further developed and improved on the basis of the traditional box substation technology. The underground part of the landscape buried box substation It occupies less than 6m², and the ground part occupies less than 3m². 3. Landscape-type box-type transformers are very suitable for installation in green belts such as gardens. Traditional box-type transformers must occupy an area of at least 10-20 square meters, and the power distribution room may occupy 70-100 square meters. In real estate development projects, such an occupation The proportion of the land area is very large. If the landscape buried box substation is adopted, the land occupation and civil construction costs can be reduced, and the taste of the community can be improved. 4. Especially in high-end residential areas, it is usually necessary to reserve a large piece of land for the construction of power distribution rooms or the installation of European and American substations, which invisibly takes up a huge amount of assets of the developer, and cannot solve the various concerns of the surrounding residents. The traditional The transformer is installed above the ground, which is very noisy and has poor aesthetics. Therefore, most box-type transformers cannot be installed closer to the residential load center. 5. The landscape-type buried box substation adopts low-temperature rise, B-class insulation, 45# pure naphthenic oil, double sealing and other technologies, and has the characteristics of maintenance-free and anti-waterlogging damage. Ensure normal operation in the state of short-term immersion in water. The live part of the switch in the landscape box is more than 1 meter away from the ground (fully sealed design can be used in special places), so the reliability of the power supply of the equipment in disaster situations can be improved. The traditional box change does not have the above characteristics. 6. Above the surface of the landscape-type buried box-type substation is an advertising light box or other landscape boxes. It cleverly hides the scary power equipment in the landscape-type box, beautifying and coordinating the surrounding environment. And it has become a beautiful scenery in the city. 7. The space occupied by the landscape buried box transformer is much smaller than that of the traditional box transformer or power distribution room, so that it can be installed close to the load center, effectively reducing the length of low-voltage cables, and saving a lot of low-voltage power lines for the country every year Loss, to achieve the dual efficiency of both material and energy saving. Requirements for service conditions of landscape box type substation: 1. The ambient air temperature shall not exceed 40℃, and the average value measured within 24h shall not exceed 35℃. The preferred values of the minimum ambient air temperature are - 5°C, - 15°C and - 25 °C. 2. The effect of solar radiation can be ignored. 3. The altitude is less than or equal to 4000m. 4. The surrounding air is not obviously polluted by dust, smoke, corrosive and/or combustible gas, steam or salt mist. If the user has no special requirements, the manufacturer can consider that these conditions do not exist. 5. Humidity conditions are as follows: the average value of relative humidity measured within 24h shall not exceed 95%; The average value of water vapor pressure measured within 24h shall not exceed 2.2kPa; The average monthly relative humidity shall not exceed 90%; The average monthly water vapor pressure shall not exceed 1.8kPa. Condensation occasionally occurs under such conditions. 6. The vibration or ground motion from the outside of the switchgear and control equipment has no obvious relationship with the normal operation mode of the equipment. If the user has no special requirements, the box transformer manufacturer may not consider these situations. Outdoor switchgear and control equipment: 1. The ambient air temperature shall not exceed 40℃, and the average temperature measured within 24h shall not exceed 35℃. Preferred values of the lowest ambient air temperature are - 10°C, -25°C, -30°C and -40°C. 2. Sharp changes in temperature should be considered. Solar radiation up to 1000W/m2 (sunny noon) should be considered. Note: Under certain solar radiation conditions, in order to not exceed the specified temperature rise, if necessary, appropriate measures can be taken, such as roof covering, forced ventilation, sunlight gathering, etc., or the method of capacity reduction can be used. Note: Solar radiation data Natural Environmental Conditions for Electrical and Electronic Products Solar Radiation and Temperature GB/T 4797.4. 3. The altitude is less than or equal to 4000m. 4. The surrounding air may be polluted by dust, smoke, corrosive gas, steam or salt mist. The pollution level shall comply with the provisions in 4.3.3 of the current national standard High/Low Voltage Prefabricated Substation (GB/T 17467). 5. The icing range to be considered is from 1mm to 20mm, but not more than 20mm. 6. The wind speed shall not exceed 34m/s (corresponding to 700Pa on the cylinder surface). 7. Condensation and precipitation should be considered.
Product features: 1. The landscape-type buried box substation adopts a modular design as a whole, which not only occupies a small area, but also has a high waterproof function. 2. The low-voltage power distribution cabinet above the ground is mainly made of stainless steel, which can realize the adjustment of high and low voltage according to the user's electricity demand. 3. For the sake of beautiful appearance, a full-color LED display screen is used in the design process of the landscape light box. The display screen can display rich and varied color patterns and animation videos, and can also show some real-time dynamics in society for residents to understand. , to display the multimedia effect perfectly. 4. The intelligent landscape-type box-type transformer can not only meet the needs of residents to achieve high and low voltage equipment, but also realize the remote measurement function of voltage, current and other information by configuring DTU intelligent monitoring devices. 5. Compared with the traditional box substation, the landscape buried box substation also adopts a fully sealed design, which has high waterproof performance. 6. In order to ensure the normal operation of the transformer and reduce the impact of the environment, an automatic drainage and temperature detection system is installed in the buried transformer and placed in a fully sealed box. 7. The installation of the landscape-type buried box transformer is relatively simple. It is only necessary to place the transformer in the pre-set pit, then tamp the soil and install the box on the ground. Generally, it is not necessary to separately install the buried transformer. maintain. Product configuration: The landscape type transformer box includes buried transformers. The iron core of the buried transformer is mainly S11 series solid rolled iron core. Compared with the amorphous alloy iron core transformer of SH15, the loss of the transformer is lower, which has the characteristics of material saving and energy saving. Especially when the transformer is no-load, the loss and no-load current are lower. As the lighting system in the city is often in the no-load state, S11 series of three-dimensional coil core transformers are more in line with the needs of urban lighting system construction. At the same time, the buried transformers of this series also have good sealing and waterproof functions and insulation and anti-corrosion functions. The high-voltage part is mainly configured with SF6 switchgear, which is not only small in size, but also generally does not require maintenance, and has safe and reliable use performance. The configuration of the low-voltage part is mainly the setting of the low-voltage distribution cabinet. The energy-saving device is installed in the low-voltage distribution cabinet, and the street lamp remote monitoring system and power supply metering system are installed on the side to achieve the telemetry function. At the same time, in order to achieve the beautiful appearance, the design of the outer light box is more flexible.
Product Advantages： 1. The landscape-type buried substation can be called in many ways, such as semi-buried box-type substation, landscape-type box-type substation, pre-installed underground box-type substation, landscape-type buried substation, etc. This is a low-carbon, energy-saving, environmentally friendly, and green integrated power distribution equipment. Their application in many fields is more in line with our concept of building an "energy-saving society", and it is more energy-saving and environmentally friendly, beautifying the environment, and reliable operation. Many advantages. 2. The landscape buried box substation is a box substation product born for the needs of urban development. It is a complete set of power supply and distribution equipment that is further developed and improved on the basis of the traditional box substation technology. The underground part of the landscape buried box substation It occupies less than 6m², and the ground part occupies less than 3m². 3. Landscape-type box-type transformers are very suitable for installation in green belts such as gardens. Traditional box-type transformers must occupy an area of at least 10-20 square meters, and the power distribution room may occupy 70-100 square meters. In real estate development projects, such an occupation The proportion of the land area is very large. If the landscape buried box substation is adopted, the land occupation and civil construction costs can be reduced, and the taste of the community can be improved. 4. Especially in high-end residential areas, it is usually necessary to reserve a large piece of land for the construction of power distribution rooms or the installation of European and American substations, which invisibly takes up a huge amount of assets of the developer, and cannot solve the various concerns of the surrounding residents. The traditional The transformer is installed above the ground, which is very noisy and has poor aesthetics. Therefore, most box-type transformers cannot be installed closer to the residential load center. 5. The landscape-type buried box substation adopts low-temperature rise, B-class insulation, 45# pure naphthenic oil, double sealing and other technologies, and has the characteristics of maintenance-free and anti-waterlogging damage. Ensure normal operation in the state of short-term immersion in water. The live part of the switch in the landscape box is more than 1 meter away from the ground (fully sealed design can be used in special places), so the reliability of the power supply of the equipment in disaster situations can be improved. The traditional box change does not have the above characteristics. 6. Above the surface of the landscape-type buried box-type substation is an advertising light box or other landscape boxes. It cleverly hides the scary power equipment in the landscape-type box, beautifying and coordinating the surrounding environment. And it has become a beautiful scenery in the city. 7. The space occupied by the landscape buried box transformer is much smaller than that of the traditional box transformer or power distribution room, so that it can be installed close to the load center, effectively reducing the length of low-voltage cables, and saving a lot of low-voltage power lines for the country every year Loss, to achieve the dual efficiency of both material and energy saving. Requirements for service conditions of landscape box type substation: 1. The ambient air temperature shall not exceed 40℃, and the average value measured within 24h shall not exceed 35℃. The preferred values of the minimum ambient air temperature are - 5°C, - 15°C and - 25 °C. 2. The effect of solar radiation can be ignored. 3. The altitude is less than or equal to 4000m. 4. The surrounding air is not obviously polluted by dust, smoke, corrosive and/or combustible gas, steam or salt mist. If the user has no special requirements, the manufacturer can consider that these conditions do not exist. 5. Humidity conditions are as follows: the average value of relative humidity measured within 24h shall not exceed 95%; The average value of water vapor pressure measured within 24h shall not exceed 2.2kPa; The average monthly relative humidity shall not exceed 90%; The average monthly water vapor pressure shall not exceed 1.8kPa. Condensation occasionally occurs under such conditions. 6. The vibration or ground motion from the outside of the switchgear and control equipment has no obvious relationship with the normal operation mode of the equipment. If the user has no special requirements, the box transformer manufacturer may not consider these situations. Outdoor switchgear and control equipment: 1. The ambient air temperature shall not exceed 40℃, and the average temperature measured within 24h shall not exceed 35℃. Preferred values of the lowest ambient air temperature are - 10°C, -25°C, -30°C and -40°C. 2. Sharp changes in temperature should be considered. Solar radiation up to 1000W/m2 (sunny noon) should be considered. Note: Under certain solar radiation conditions, in order to not exceed the specified temperature rise, if necessary, appropriate measures can be taken, such as roof covering, forced ventilation, sunlight gathering, etc., or the method of capacity reduction can be used. Note: Solar radiation data Natural Environmental Conditions for Electrical and Electronic Products Solar Radiation and Temperature GB/T 4797.4. 3. The altitude is less than or equal to 4000m. 4. The surrounding air may be polluted by dust, smoke, corrosive gas, steam or salt mist. The pollution level shall comply with the provisions in 4.3.3 of the current national standard High/Low Voltage Prefabricated Substation (GB/T 17467). 5. The icing range to be considered is from 1mm to 20mm, but not more than 20mm. 6. The wind speed shall not exceed 34m/s (corresponding to 700Pa on the cylinder surface). 7. Condensation and precipitation should be considered.
